RENTAL SANY STC1000S TRUCK CRANE

100 t truck crane with long reach, fast setup, and precise control—built for heavy lifts on tight schedules.

  • 6-section telescopic boom: 12.26–56 m; up to 77.5 m with jib
  • All-axle steering and auto-leveling outriggers for stable, quick positioning
  • SYMC control with load-moment limiter and CAN-bus diagnostics
  • Max travel speed up to 80 km/h; gradeability up to 40%
  • Ideal for infrastructure, industrial plants, and heavy construction

Rental SANY STC1000S Truck Crane

Description

SANY STC1000S Truck Crane — 100 t Class

The STC1000S is a high-capacity, roadable truck crane engineered for fast setup, precise handling, and dependable performance on complex jobsites. A 6-section telescopic boom delivers strong charts across the working range, while all-axle steering and auto-leveling outriggers shorten time to lift.

Key Highlights

  • Max lifting capacity: 100 t
  • Telescopic boom: 12.26–56 m; up to 77.5 m with jib
  • Control & safety: SYMC control, load-moment limiter, CAN-bus diagnostics
  • Mobility: up to 80 km/h road speed, 40% gradeability
  • Outriggers: auto-leveling; max span approx. 7.8 m × 7.91 m

Performance & Working Range

  • High lifting torque on basic and fully extended boom for confident picks at radius
  • 0°, 15°, 30° jib offsets expand duty at height and over obstacles
  • Fast winch line speeds and smooth slewing for efficient cycle times

Mobility & Setup

  • All-axle steering for tight sites and improved maneuverability
  • Dual-circuit hydraulic steering and leaf-spring suspension across axles
  • Auto-leveling outriggers and clear outrigger controls reduce setup time

Powertrain

  • Diesel engine (inline-6, water-cooled, turbocharged, inter-cooled)
  • Rated power about 275 kW @ 2100 rpm; rated torque about 1550 N·m
  • Manual transmission with wide ratio spread for road and site use

Operator Systems & Safety

  • SYMC controller with CAN-bus diagnostics and load-moment limiter
  • Height and over-roll-out limiters, hydraulic locks, and anemometer support safe lifting
  • Ergonomic cab layout for precise boom, winch, and slewing control

Dimensions & Transport

  • Overall length approx. 14,050 mm; width approx. 2,800 mm; height approx. 4,000 mm
  • Axle load distribution designed for compliant road travel
  • Tyres: 8 × 385/95R25

Typical Applications

  • Infrastructure erection and bridge works
  • Industrial plant installation and maintenance
  • Heavy construction, precast handling, and logistics yards

Notes

Specifications and features may vary by configuration and market. Charts and transport weights should be verified against the current official datasheet and local regulations before planning lifts or road movements.

Technical Specifications

Manufacturer

SANY

Model number

STC1000S

Max lifting capacity

100 t

Overall length

"14

Overall width

"2

Overall height

"4

Axle distance (Axle 1–2)

"2

Axle distance (Axle 2–3)

"3

Axle distance (Axle 3–4)

"1

Wheel distance (Axle 1–2)

"2

Wheel distance (Axle 3–4)

"2

Overall weight

"46

"Axle load (front

حمل المحور الأمامي (١–٢)

"Axle load (rear

حمل المحور الخلفي (٣–٤)

Engine model

ISLe375 30

Engine type

"Inline 6

Rated power

275 kW @ 2100 rpm

Rated torque

1550 N·m @ 1100–1400 rpm

Emission standard

GB III

Fuel tank capacity

450 L

Transmission

"Manual

Drive/Steer

"Axles 3–4 drive

Max travelling speed

80 km/h

Min stable travelling speed

1.89 km/h

Min turning radius

10.5 m

Min ground clearance

320 mm

Approach angle

21°

Departure angle

19°

Braking distance (at 30 km/h)

≤10 m

Max gradeability

40%

Fuel consumption (per 100 km)

≤50 L

Max rated lifting capacity

100 t

Min working radius

3 m

Max lifting torque (basic boom)

3300 kN·m

Max lifting torque (fully extended boom)

1824 kN·m

Outrigger span (max)

7.8 m × 7.91 m

Outriggers type

"Front swing

Telescopic boom sections

6

Boom length (basic)

12.26 m

Boom length (fully extended)

56 m

Lifting height (basic boom)

12.26 m

Lifting height (fully extended boom)

56 m

Max lifting height with jib

77.5 m (71.5 m noted)

Jib length

15.5 m (optional 6 m ext.)

Jib offset angles

"0°

"Max single‑rope speed (main winch

أقصى سرعة حبل مفرد (ونش رئيسي بدون حمل)

"Max single‑rope speed (aux winch

أقصى سرعة حبل مفرد (ونش مساعد بدون حمل)

Boom extend/retract time

480 s / 500 s

Boom lift/lower time

60 s / 80 s

Slewing speed

0–1.6 r/min

Horizontal outrigger extend/retract

25 s / 15 s

Vertical outrigger raise/lower

40 s / 35 s

Tyres

8 × 385/95R25

Counterweight options

"0 t

Counterweight swing radius

"4

Traveling with 8.5 t CW

Short distance allowed with conditions

Steering system

Dual‑circuit hydraulic power steering

Suspension system

Leaf springs on all axles

Electrical system

"2 × 12 V batteries

Control system

"SYMC controller

Outrigger control

Electrically controlled with auto leveling

Safety systems

"Over‑roll out limiters

Manufacturer

SANY

Model number

STC1000S

Max lifting capacity

100 t

Overall length

"14

Overall width

"2

Overall height

"4

Axle distance (Axle 1–2)

"2

Axle distance (Axle 2–3)

"3

Axle distance (Axle 3–4)

"1

Wheel distance (Axle 1–2)

"2

Wheel distance (Axle 3–4)

"2

Overall weight

"46

"Axle load (front

حمل المحور الأمامي (١–٢)

"Axle load (rear

حمل المحور الخلفي (٣–٤)

Engine model

ISLe375 30

Engine type

"Inline 6

Rated power

275 kW @ 2100 rpm

Rated torque

1550 N·m @ 1100–1400 rpm

Emission standard

GB III

Fuel tank capacity

450 L

Transmission

"Manual

Drive/Steer

"Axles 3–4 drive

Max travelling speed

80 km/h

Min stable travelling speed

1.89 km/h

Min turning radius

10.5 m

Min ground clearance

320 mm

Approach angle

21°

Departure angle

19°

Braking distance (at 30 km/h)

≤10 m

Max gradeability

40%

Fuel consumption (per 100 km)

≤50 L

Max rated lifting capacity

100 t

Min working radius

3 m

Max lifting torque (basic boom)

3300 kN·m

Max lifting torque (fully extended boom)

1824 kN·m

Outrigger span (max)

7.8 m × 7.91 m

Outriggers type

"Front swing

Telescopic boom sections

6

Boom length (basic)

12.26 m

Boom length (fully extended)

56 m

Lifting height (basic boom)

12.26 m

Lifting height (fully extended boom)

56 m

Max lifting height with jib

77.5 m (71.5 m noted)

Jib length

15.5 m (optional 6 m ext.)

Jib offset angles

"0°

"Max single‑rope speed (main winch

أقصى سرعة حبل مفرد (ونش رئيسي بدون حمل)

"Max single‑rope speed (aux winch

أقصى سرعة حبل مفرد (ونش مساعد بدون حمل)

Boom extend/retract time

480 s / 500 s

Boom lift/lower time

60 s / 80 s

Slewing speed

0–1.6 r/min

Horizontal outrigger extend/retract

25 s / 15 s

Vertical outrigger raise/lower

40 s / 35 s

Tyres

8 × 385/95R25

Counterweight options

"0 t

Counterweight swing radius

"4

Traveling with 8.5 t CW

Short distance allowed with conditions

Steering system

Dual‑circuit hydraulic power steering

Suspension system

Leaf springs on all axles

Electrical system

"2 × 12 V batteries

Control system

"SYMC controller

Outrigger control

Electrically controlled with auto leveling

Safety systems

"Over‑roll out limiters

Ratings

0.00 ( 0 )

Comments 0

No comments yet.

Pricing Information

Rental Rate

SAR 10,000.00 per month
Availability: In Stock (3)
Delivery time: 3–9 days

Downloads

Loading...